Wide Temp Batteries 12V 100Ah LiFePO4 battery on a rock between snow-covered mountains and sunlit desert terrain
Exclusive North American distributor

LiFePO4 Batteries That Charge and Discharge in Extreme Cold — Without a Heater

Wide Temp Batteries supplies industrial-grade LiFePO4 batteries for demanding commercial environments. As the manufacturer's exclusive North American distributor, we offer existing battery models and coordinate application-specific battery development for OEM manufacturers, equipment builders and wholesale distributors.

Current battery models

Current extreme-temperature LiFePO4 batteries

Two current industrial-grade models built on the same low-temperature LiFePO4 cells. Both charge and discharge in cold conditions without an internal heater. Order either as a standard product or use it as the starting point for an OEM configuration.

12V 100Ah Extreme-Temperature LiFePO4 Battery

Model WT-LFP12-100
Nominal voltage
12.8 V
Capacity
100 Ah (1,280 Wh)
Heating
Heater-free extreme-temperature technology
Cell temperature
Charge to −35°C (−31°F), discharge to −40°C (−40°F)
Cycle life
4,000+ cycles with 80% capacity remaining

Applications: solar-charged security cameras, telecom and remote monitoring sites, weather stations, roadside signs and sensors.

24V 100Ah Extreme-Temperature LiFePO4 Battery

Current 24V configuration
Voltage
24 V
Capacity
100 Ah
Heating
Heater-free extreme-temperature technology
Cell temperature
Charge to −35°C (−31°F), discharge to −40°C (−40°F)
Cycle life
4,000+ cycles with 80% capacity remaining
BMS
Charge and discharge limits configurable in firmware

Applications: 24V solar and off-grid systems, remote equipment and OEM equipment that needs current limits set for the application.

Heater-free extreme-temperature LiFePO4 technology

Why cold-weather charging matters

Standard LiFePO4 batteries are commonly restricted from charging below freezing, even when they can still discharge. Some cold-weather designs add an internal heater that uses stored energy to warm the cells before charging. For solar-charged and unattended equipment, a battery that cannot accept a charge in the cold loses charging days when the equipment needs them most. Our batteries are designed to charge and discharge at low temperatures without an internal heater.

01Long cycle life

The manufacturer confirms 4,000+ charge and discharge cycles with 80% of capacity still available afterward, which can reduce battery replacements over the equipment's service life.

02Heater-free charging and discharging

Both models use low-temperature cells rated by the manufacturer to charge down to −35°C (−31°F) and discharge down to −40°C (−40°F). No internal heater is needed within the manufacturer's approved operating limits, so no stored energy goes to warming the battery and there is no heating circuit to maintain. These are cell ratings; complete-battery limits are confirmed for each application.

03Usable capacity and power delivery

LiFePO4 maintains a relatively stable voltage throughout much of its discharge cycle, so equipment sees consistent power as the battery drains. The integrated BMS manages charging and discharging and protects the cells.

04Low self-discharge

The batteries are designed for low self-discharge, so they hold their charge better in storage, in transit and in standby equipment. Self-discharge data is available in the manufacturer's technical documentation.

See the battery technology

The reliability advantage

Built for equipment that has to stay powered

For unattended equipment, battery service life directly affects maintenance costs. A battery that lasts more cycles needs fewer replacement visits and keeps equipment available longer.

4,000+Charge and discharge cycles
80%Capacity remaining after 4,000+ cycles
No heaterLow-temperature operation without an internal heater
RJ45BMS monitoring through manufacturer software

Longer service life

A longer cycle life can reduce battery replacements across a fleet of field equipment.

Less maintenance

No watering, no heating circuit and an integrated BMS that protects the cells.

Higher equipment availability

Cold-weather operation without a heater helps keep remote equipment powered through winter.

Actual service life depends on depth of discharge, temperature, charge rate and load.

Battery comparison

Conventional lead-acid vs. Wide Temp LiFePO4

How an extreme-temperature LiFePO4 battery compares with the lead-acid batteries it often replaces in remote and outdoor equipment.

FactorConventional lead-acidWide Temp LiFePO4
Battery chemistryLead and sulfuric acid (flooded, AGM or gel)Lithium iron phosphate (LiFePO4)
Temperature performanceCapacity and charge acceptance typically drop in cold weather; results vary by type and manufacturerLow-temperature cells rated by the manufacturer to charge down to −35°C (−31°F) and discharge down to −40°C (−40°F)
Cold-weather operationOften relies on oversizing, insulated enclosures or added heating in cold climatesNo internal heater required within the manufacturer's approved operating limits
Cycle lifeVaries widely by type and depth of discharge; generally lower than LiFePO4 in deep-cycle use4,000+ cycles with 80% capacity remaining (manufacturer-confirmed)
Usable capacityRepeated deep discharge shortens service life, so usable capacity is often limited in practiceSteady voltage through most of the discharge; usable capacity for your duty cycle confirmed in technical review
MaintenanceFlooded types need watering; all types need regular charging to avoid sulfationNo watering; integrated BMS protects the cells
BMS capabilitiesTypically noneIntegrated BMS with RJ45 monitoring software and firmware-configurable charge and discharge limits
Replacement and lifecycleShorter cycle life generally means more frequent replacement and site visitsLonger cycle life can reduce replacement frequency, depending on operating conditions

Lead-acid performance varies by battery type, manufacturer and operating conditions. Comparisons are general.

Industry documentation

Certifications and technical documentation

The manufacturer has confirmed the following certifications and documents. Coverage can differ by model, so we confirm which documents apply to the exact model and configuration you are evaluating and provide copies.

MSDS

Material safety data sheet

Safety documentation covering handling, storage and emergency response.

UN38.3

Transport testing

UN transport testing for lithium batteries, used to qualify batteries for shipment.

IP67

Ingress protection

Rated dust-tight and protected against temporary immersion in water.

UL164224V 100Ah

Lithium cell safety standard

Available for the 24V 100Ah model. UL1642 covers lithium cells; it is not a UL listing of the complete battery.

Manufacturer test reports for OEM and commercial evaluation

The manufacturer holds test data and reports for its batteries. Send your project requirements; the manufacturer verifies each item and provides accurate data for your application. Other certifications your market requires can be reviewed with the manufacturer for your project.

Battery management

BMS monitoring and configuration

Every battery includes an integrated battery management system. The manufacturer supports it with monitoring software and firmware configuration.

RJ45 monitoring software

The manufacturer's software connects to the battery through its RJ45 port and displays a wide range of operating parameters, including voltage, current, temperature and capacity settings.

Configurable charge and discharge limits

Charge and discharge current limits are set in the BMS firmware. The manufacturer adjusts them to match each customer's approved application requirements.

Series and parallel configurations

The manufacturer confirms up to 16 batteries in parallel and up to 4 in series, for higher capacity or higher system voltage.

Application-specific technical review

We confirm the configuration for your equipment with the manufacturer before quoting, including current limits, connection layout and monitoring needs.

Exclusive North American distribution

Wide Temp Batteries is the exclusive North American distributor for the manufacturer's applicable battery product line. We work directly with the factory on technical questions, quotations, application-specific configurations and production orders, and we manage your account in the United States and Canada from first inquiry through reorders.

Tell us your application

Share your business, volume and the equipment or market you supply.

Requirements review

We check your requirements against manufacturer data and take open technical questions to the manufacturer.

Quote

You receive pricing for your model, configuration and volume.

Sample or pilot

Optional evaluation units for qualified projects.

Purchase order

Place your PO and we manage the order through delivery and reorders.

For equipment manufacturers

Custom batteries for OEM applications

Equipment manufacturers are not limited to the current models. Through direct coordination with the factory, we can have the manufacturer evaluate a battery configured for your equipment, including a different voltage, capacity, physical size, BMS setup or operating requirement. Each request goes through the manufacturer's engineering review before we confirm what can be supplied and quote it.

  • Voltage, capacity and energy requirements
  • Operating temperature range
  • Charge and discharge current
  • Monitoring and communication needs
  • Required certifications and test data
  • Quantity and forecast volume
FAQ

Frequently asked questions

What makes Wide Temp Batteries different?

We are the manufacturer's exclusive North American distributor for industrial-grade LiFePO4 batteries built on low-temperature cells that charge and discharge without an internal heater. Customers can buy a current model or have the manufacturer evaluate a configuration for their equipment. We supply OEM manufacturers, distributors, integrators and commercial buyers in the United States and Canada.

Can WTB batteries operate without internal heaters?

Yes. The manufacturer confirms that both the 12V 100Ah and 24V 100Ah batteries do not require heating in low-temperature conditions and operate within their suitable temperature range. They do not use a heater of any kind.

What are the manufacturer's low-temperature charging and discharging capabilities?

Both models use the same low-temperature cells. The manufacturer rates the cells for charging down to −35°C (−31°F) and discharging down to −40°C (−40°F).

What is the difference between cell and complete-battery temperature ratings?

Cell ratings describe the limits of the cells inside the battery. A complete battery's operating limits also depend on its BMS settings, charging current, load and installation. For your project, the manufacturer provides complete-battery operating limits, charging-current data and application conditions based on your requirements.

How long do WTB batteries last?

The manufacturer confirms 4,000+ charge and discharge cycles with 80% of capacity remaining. The manufacturer's specification also lists a 10-year design lifespan; that is an engineering design figure, not a warranty. Actual service life depends on depth of discharge, temperature, charge rate and load.

What does 4,000+ cycles with 80% capacity remaining mean?

After more than 4,000 charge and discharge cycles, the battery still holds 80% of its rated capacity. For a 100Ah battery, that is about 80Ah still available. Test conditions are documented in the manufacturer's test reports, which are available for project evaluation.

Can battery charge and discharge current limits be adjusted?

Yes. Charge and discharge current limits are set in the BMS firmware. The manufacturer configures them for each customer's application and can adjust them to match your approved requirements.

Does WTB offer battery monitoring software?

Yes. The manufacturer's monitoring software connects through the battery's RJ45 port and displays a wide range of operating parameters. Tell us what you need to monitor, and we confirm the details for your model.

Can WTB batteries connect in series or parallel?

Yes. The manufacturer confirms up to 16 batteries in parallel and up to 4 in series. Wiring and installation guidance for your configuration is covered during technical review.

What certifications and documents are available?

The manufacturer has confirmed MSDS safety documentation, UN38.3 transport testing and an IP67 ingress protection rating. UL1642, a lithium cell safety standard, is available for the 24V 100Ah model. Other certifications your market requires can be discussed with the manufacturer.

Can customers obtain actual manufacturer test reports?

Yes. The manufacturer has test data and reports available. Send your project requirements; the manufacturer verifies each item and provides accurate information for your application.

Can manufacturers request application-specific configurations?

Yes. Customers are not limited to the current models. Submit your voltage, capacity, size, BMS and operating requirements through our OEM form. The manufacturer evaluates each requirement, and we confirm what can be supplied before quoting. Submit OEM requirements.

Is there a minimum order quantity?

The manufacturer does not set a minimum order quantity. Pricing and terms depend on model, configuration and volume, and are confirmed in your quote.

Which industries do you serve?

We offer our batteries to buyers in security and surveillance, telecommunications, weather stations, oil and gas, infrastructure and utilities, off-grid and cabin systems, RV and recreation, marine, residential installers, mining, firefighting and scientific expeditions.

How can distributors request wholesale pricing?

Use the Request Wholesale Pricing form with your business details, application and expected volume. We follow up with next steps and a quote. Request wholesale pricing.

What are the available warranty terms?

Warranty terms are confirmed during commercial review and stated in your quotation. The 10-year design lifespan in the manufacturer's specification is not a warranty.

How are production lead times and pricing determined?

Pricing, production schedules and delivery dates depend on model, configuration and order volume. They are confirmed in your quotation.

Need a Battery for Your Equipment or Product Line?

Whether you're sourcing an existing model or evaluating a battery for a new product, tell us what your business needs. We can coordinate the technical and commercial requirements with our manufacturer.

Request Battery Pricing