
Extreme-temperature LiFePO4 batteries for equipment that works in the cold
Wide Temp Batteries works with manufacturers that build batteries into outdoor, remote and mobile equipment. We review your application requirements with the manufacturer before we recommend a battery or quote.
The challenges we review
Equipment installed outdoors has to keep working through cold nights and hot days, often with no one on site to service it.
Cold-weather operation
Standard LiFePO4 batteries are commonly restricted from charging below freezing, which can cost charging days at cold sites.
Power reliability
Unattended equipment needs predictable power across seasons, loads and charging conditions.
Product integration
The battery has to fit your enclosure, charging system, monitoring and documentation requirements.
Heater-free, not self-heating
Self-heating batteries use an internal heating element that draws power to warm the cells before charging. Our batteries do not.
They use low-temperature LiFePO4 cells intended for charging and discharging in cold climates, with no internal heating element. The manufacturer rates these cells for charging down to −35°C (−31°F) and discharging down to −40°C (−40°F). These are cell ratings; complete-battery limits depend on BMS settings, charge rate, load and installation.
Integrated battery management
Every battery includes an integrated battery management system that manages charging and discharging and protects the cells.
The manufacturer's monitoring software connects through the battery's RJ45 port. Tell us what your equipment needs to monitor, and we will confirm the details for your model.
Product families
WT-LFP12-100 · 12V 100Ah
A 12-volt lithium iron phosphate battery for solar-charged, remote and outdoor equipment. Values shown come from the manufacturer's current specification sheet for this model.
| Model | WT-LFP12-100 |
|---|---|
| Chemistry | Lithium iron phosphate (LiFePO4) |
| Nominal voltage | 12.8 V |
| Rated capacity | 100 Ah (10-hour rate) |
| Energy | 1,280 Wh |
| Battery management | Integrated BMS |
| Internal heater | None |
| Terminals | Screw terminal |
| Case material | ABS + PC |
| Dimensions (L × W × H) | 10.25 × 6.7 × 8.4 in |
| Weight | Approx. 22 lb |
24V 100Ah
The current 24V 100Ah battery uses the same low-temperature LiFePO4 cells as the 12V model. Charge and discharge current limits are set in the BMS firmware for each approved application, so current ratings, dimensions and weight are confirmed with your quote. These ratings apply to the 24V 100Ah model only.
Share your voltage, capacity and environmental requirements, and we will tell you what can be confirmed for your application.
Engineering considerations
We review these requirements with you and the manufacturer. We confirm only what the manufacturer has documented for the exact model.
Voltage and capacity
System voltage, required capacity and the runtime your equipment needs between charges.
Operating environment
Minimum and maximum temperatures at your sites, and how the battery is enclosed and mounted.
Dimensions and weight
Available space, terminal access and weight limits in your enclosure or vehicle.
Charging profile
Your charger or solar controller, charge and discharge currents, and charging conditions.
Monitoring and communication
The interfaces your equipment needs to read battery status.
Documentation
The specification, test and safety documents your product and market require.
How OEM engagement works
Requirements review
Send your application requirements through the form below.
Technical discussion
We review requirements with you and take open questions to the manufacturer.
Quotation
You receive pricing for the confirmed model, configuration and volume.
Sample or pilot
Evaluation units can be arranged for qualified projects.
Purchasing
Purchase orders, delivery updates and repeat orders are handled by one account manager.
Commercial supply
We work with manufacturers that build batteries into their products and buy in volume. Each inquiry is qualified on application fit, volume and timeline, and one account manager handles your project from review through reorders.
Discuss your battery requirements
The more you can share, the faster we can respond accurately.
- Intended application and operating environment
- Required voltage and capacity
- Minimum and maximum operating temperatures
- Charging and discharge current requirements
- Quantity and forecast annual volume
- Mechanical, size and packaging requirements
- Monitoring and communication requirements
- Required certifications and test documentation
Building equipment for cold or exposed sites?
Send your requirements and we will review them with the manufacturer.
Discuss OEM Battery Requirements